Service Overview
About This Service
A contact-safe maintenance wash designed to clean thoroughly while protecting the existing finish.
More than simply washing your vehicle.
Even after a thorough wash, contaminants can remain bonded to the paintwork, wheels, glass and other exterior surfaces. Our Exterior Detailing & Decontamination service is designed to thoroughly clean the vehicle and remove contamination that regular washing alone cannot.
What can the service include?
The process is adapted to the condition and needs of each vehicle and may include:
- Thorough exterior cleaning
- Wheels, tyres and wheel arches
- Door shuts and difficult-to-reach areas
- Engine bay detailing
- Exterior glass
- Chemical paint decontamination
- Removal of iron contamination, tar and other bonded deposits
- Mechanical decontamination when required
- Cleaning of exterior plastics, trims and other surfaces
The objective isn’t to perform unnecessary steps. We assess the vehicle and use the appropriate processes according to its actual condition.
What is paint decontamination?
A vehicle can look clean while its paintwork is still contaminated.
Brake dust, iron particles, road contamination, tar and other deposits can bond to the surface and may not be removed through normal washing.
Decontamination targets these deposits, leaving the surface properly cleaned and significantly smoother while preparing it for any further treatment.
What won’t this service fix?
This is an important distinction.
Decontamination cleans the paint — it does not correct it.
Scratches, swirl marks, oxidation, sanding marks and other defects within the paintwork cannot simply be washed or decontaminated away.
For these defects, the vehicle may require Paint Correction.
Likewise, cleaning and decontamination should not be confused with long-term protection. If protection is required, we can advise on the appropriate solution after assessing the vehicle.
Why start here?
Proper cleaning and decontamination allow us to see the true condition of the vehicle.
From there, we can determine whether the vehicle simply needed a thorough reset or whether further work, such as Paint Correction or Ceramic Protection, would genuinely benefit it.
Not sure what your vehicle needs?
You don’t need to know which processes to ask for.
Tell us what you would like to improve about your vehicle, and we’ll assess its condition, explain what can realistically be achieved and recommend the appropriate level of service.
The Process
What’s Included
- 01
Wheels and pre-wash
Address the dirtiest areas and soften road film before contact.
- 02
Controlled contact wash
Work from cleaner upper panels down with clean wash media.
- 03
Rinse completely
Remove shampoo and contamination from gaps and lower areas.
- 04
Dry and inspect
Use safe drying media, clear crevices, and finish the details.
DIY Tutorial
Safe Hand Wash
Follow each step in order and use the products connected to that part of the process.
Avoid allowing chemicals or water to dry on the surface.
Remove as much loose contamination as possible before contact.
Keep wheel and paint tools separate and rinse wash media frequently.
Products Used
Products Used in This Service
Soft99
Soft99 Qjutsu Creamy Shampoo 750ml
With a new design and slick bottle, Qjutsu Creamy Shampoo 750 by Soft99 is an exceptional solution to…
Soft99
Soft99 Qjutsu Ultra Soft Sponge
Introducing the Qjutsu Ultra-Soft Sponge, a revolutionary car washing accessory designed to elevate your cleaning experience to new…
Ready for a better finish?
Let the workshop handle the process.
Tell us about the car and the result you want. We will advise the right path.